Please follow the following safety guidelines:
This product must be used with an appropriate air purifier or similar ventilation device. We recommend using the obziy purifier. If your kit does not include one, you can purchase it separately.
When using the air purifier, replace the filter as instructed to ensure proper operation.
If you experience respiratory discomfort, dizziness, or other symptoms during use, stop operating immediately, move to a well-ventilated area, and wait until the fumes have completely dissipated before resuming.
Minors, pregnant individuals, and those with respiratory conditions must not remain in the workspace or operate the equipment.
Personnel working in the area are advised to wear appropriate protective masks.
Please follow the safety guidelines below:
Do not disassemble any parts of the device when it is connected to power, to avoid accidental contact with live electricity.
Do not touch electronic components with your hands or tools while the device is connected to power.
Use only the power cord provided with this device; using power cords from other devices may cause fire or electric shock.
Ensure that the AC power cord complies with local safety standards.
Connect the power cord to an outlet with a grounding connection.
Do not open, modify, or attempt to repair the power cord, plug, or any component of this device.
Place the power cord in a location where it is protected from friction, cutting, abrasion, bending, and twisting. Do not place objects on the cord, and do not step on or crush it.
If you plan to leave the device unused for an extended period, unplug it from the power outlet.
Please follow the safety guidelines below:
Never operate the device unattended. Always closely monitor its operation to ensure it is functioning properly.
Do not disassemble or modify the device structure in any way, and do not alter or decompile the device's operating system without authorization.
Do not place the device outdoors, or in dirty, dusty, damp, or hot environments, nor in locations prone to vibration, shaking, high temperature, or high humidity.
Prevent liquids from entering the device, and never operate it with wet hands.
Place the device on a flat, stable surface.
Do not insert foreign objects into the device's slots.
During printing, do not insert your hand inside the device.
Do not touch the device casing while it is operating. The device may become very hot during use, which could result in burns.
When opening the maintenance door for servicing, the device will pause processing. However, please note that internal components may be hot; to avoid burns, do not directly touch the interior.
Keep the device away from flammable or explosive materials, as the high temperatures generated by the device may cause fires.
Please follow the safety guidelines below:
Always check the device for damage before each use. Do not operate any damaged or defective machine under any circumstances.
Keep the workspace clean and level.
Maintain the interior of the device clean.
Avoid placing the device in locations where temperature and humidity fluctuate drastically. Also, protect it from direct sunlight, strong light sources, or heat sources.
The operating ambient temperature for the device is 20°C to 30°C, storage temperature is 5°C to 35°C, and relative humidity should be between 30% and 80%. Operation at sub-zero temperatures is strictly prohibited.
Self-repair of the product is forbidden; repairs must be performed by authorized service personnel or returned to the factory.
Before performing any maintenance on the machine, disconnect the power supply to the powder shaking roaster.