Setting: Plug in and switch on. Set the temperature according to different base materials and iron-on type.
Get prepared: Make your workbench flat and stable. Use a heat-proof mat or a folded fluffy towel to protect your workbench surface.
Preheat the base material: Place your base material on the mat/towel for 5 seconds to remove wrinkles and moisture.
Position and press: Place your design wherever you want on the base material, place the machine on the design.
Flip and repeat: Flip the base material and apply heat on the backside of the design for 15 seconds.If the transfer paper or heat transfer vinyl doesn’t lift easily, reapply and reheat a few more seconds.
Peel to finish: Peel off transfer paper or HTV (Please check the transfers are warm peel or cold peel, and peel off accordingly).
Note:
Please switch off the machine and unplug the power cord when the machine is not in use.
It may be easy, but it’s also HOT. Handle with care.