A: Please don't worry, it is normal, after the temp reach your desired value (not setting value), you can press the timer. Make sure that your temp reach the recommended settings.
A: For perfect transfers that lasting, three things are important:
1. A stable and even surface, but iron boards and plastic tables can not provide a stable and even surface required for successful transfers, so we suggest you use an extra silicone mat(not included).
2. Use the recommended settings for the iron-on and base material you're using.
3. Make sure you apply firm pressure when transfer.
A: Some applications call for "gentle" pressure, and some call for "firm" pressure. "Firm" pressure means press down with two hands and 15-40 lbs of body weight. "Gentle" pressure means one hand with 5-15 lbs of body weight. In all cases, a waist-high table is recommended when applying the recommended pressure.
A: There may be 3 situations, the first is that the pressure is too low, the second is that the temperature is not hot enough, and the third is that the design has not been suppressed for enough time. You may need to try more to get the correct temperature, time, and pressure.
A: The most common reasons for your images not sticking:Press machine did not make full contact with the base material. This could be because of
1. seams, zippers, or anything else that will cause an uneven surface.
2. Verify that your press machine is set to the recommended settings.
3. Be sure heat has been applied to both the front and the back of the design for recommended time.
4. Re-touch the front and back of material with heat for an additional 10-15 seconds.
A: Press temperature may fluctuate briefly when placed on the base material after heating.This is due to the difference in temperature of the heated plate and the base material.Don't worry, the machine temperature will quickly return to the selected setting. Your image adhesion will not be affected.
A: This is the auto shut off safety feature of heat press machine. After 10 minutes of inactivity, or no button pressed, the device will alert you and then shut off.