Setting: Plug in and switch on. Set the temperature and time according to different base
materials and iron-on type.
Get prepared: Ensure your table flat and stable. Use a heat-proof mat or a folded fluffytowel to protect your table surface.
Preheat the base material: Place your base material on the mat /towel for 5 seconds to remove wrinkles and moisture.
Position and press: Piace your design wherever you want on the base material, piace the machine on the design. Start the timer. Apply pressure until the machine beeps.
Flip and repeat: Flip the base material and apply heat on the backside of the design for 15 seconds.If the transfer paper or heat transfer vinyl doesn't lift easily, reapply and reheat a few more seconds.
Peel to finish: Peel off transfer paper or HTV (Please make sure transfers are warm peel or cold peel).
Note：Please switch off the machine and unplug the power cord when the machine is not in use.
Please be careful the machine may still be hot, it needs a period of time to cool down after use.