| Pressing Method | Target Effect | Temperature(℃) | Pressure(Pa) | Time | Key Notes | Forbidden Operation |
|---|---|---|---|---|---|---|
| Waffle Press | Keep waffle embossed texture | 145-150 | 50 (Light) | 100s | Must use dedicated waffle mat; set pressure to minimum. Fuse beads without flattening texture. | High pressure will flatten and erase the texture |
| Fine Glitter Press | Preserve fine glitter shine, no dulling | 145-150 | 50 | 95 | Use lower temperature range; glitter side facing up. Time is 1/4 shorter than standard pressing. | Temperature over 150℃ burns glitter dark & dull |
| Chunky Glitter Press | Retain 3D chunky glitter flakes | 145-150 | 50~60 (Light) | 95 | Set temperature to 140℃; use light pressure to prevent flakes embedding into bead surface. | High temperature & long time melts glitter and causes sticking |
| Gloss Amber Finish | Mirror gloss surface for amber beads | 150~155 | 50-60 (Light) | 160 | Use upper temperature limit; increase pressure and extend time by 15% for full melt mirror finish. | Do not open mid-cycle, indent marks will ruin mirror effect |
| Cinderella Style Press | Semi-transparent foggy & gradient look | 145-150 | 50 | 110 | Do not over-press; keep semi-transparent effect. Time is 15% shorter than standard pressing. | High temp & pressure removes fog and creates full clear gloss |
| Towel Texture Press | Fuzzy towel fabric texture | 150 | 50 (Min) | 100 | Keep temperature below melting threshold. Light & short press only fuses surface, retains bead 3D shape. | Over 150℃ melts beads flat and loses fuzzy texture |
| Size | Standard Press | Waffle | Fine Glitter | Chunky Glitter | Gloss Amber | Cinderella | Towel |
|---|---|---|---|---|---|---|---|
| Extra Small (3~4cm) | 22 | 63 | 60 | 60 | 101 | 69 | 63 |
| 2 Extra Small | 22 | 63 | 60 | 60 | 101 | 69 | 63 |
| Small (6~7cm) | 35 | 100 | 95 | 95 | 160 | 110 | 100 |
| 2 Small Pieces | 38 | 108 | 103 | 103 | 174 | 119 | 109 |
| Medium (Standard Board) | 35 | 100 | 95 | 95 | 160 | 110 | 100 |
| Medium-Large | 40 | 114 | 109 | 109 | 183 | 126 | 114 |
| Large (Nearly Full Platen) | 45 | 129 | 122 | 122 | 206 | 141 | 129 |
| Extra Large (104×104) | 58 | 166 | 157 | 157 | 262 | 183 | 166 |
Equipment: Auto heat press (50~110Pa, delivers 10Pa higher pressure than similar models) | Medium handheld heat press (Max 400℃) | Perler bead melting point: 140~150℃
| Size Spec | Temperature(℃) | Pressure(Pa) | Time(sec) | Press Method | Notes |
|---|---|---|---|---|---|
| Extra Small (mini) 3~4cm | 150 | 50 | 40 | Single-side press | Pressure 10Pa higher than market; time shortened ~12% |
| 2 Extra Small (mini) | 150 | 50 | 40 | Single-side press | For two pieces on same board |
| Small (6~7cm) | 150 | 50 | 60 | Single-side press | |
| 2 Small Pieces | 145 | 70 | 38 | Single-side press | For two pieces on same board |
| Medium (Standard Board) | 150 | 75 | 35 | Single-side press | 150℃ temperature range |
| Medium-Large | 150 | 75 | 40 | Single-side press | |
| Large (Nearly Full Platen) | 150 | 80 | 45 | Single-side press | Larger area, slightly higher pressure |
| Extra Large (104×104) | 150 | 80 | 58 | Single-side press | Max platen size, longest pressing time |